STG FINANCE IS HERE TO HELP YOU.
Water Trucks for Sale in Queensland
STG Global manufactures and supplies water trucks for civil, construction and mining operations across Queensland. Choose from galvanised steel and poly tank models ranging from 8,000L to 19,000L, with 4×2, 6×4 and 8×4 chassis configurations available across the range.
Queensland customers are supported through STG Global's Ormeau facility, providing manufacturing, service and ongoing support from South East Queensland.
If you already know the capacity you need, compare the available models below. If you are still deciding, STG can help match the truck configuration to your site, application and operating requirements.
Working with Australia's Leading Businesses
Galvanised Water Trucks
STG's galvanised water truck range is available in three capacities, giving Queensland operators options across 4×2, 6×4 and 8×4 chassis configurations.
8,000L Water Truck
4×2 Cab Chassis
A compact galvanised water truck for operations where manoeuvrability needs to be balanced with useful water capacity.
13,000L Water Truck
6×4 Cab Chassis
A mid capacity galvanised model for civil, construction and site water applications requiring additional water carrying capacity.
18,000L Water Truck
8×4 Cab Chassis
The largest galvanised water truck in the STG range, suited to higher capacity applications including dust suppression and bulk water delivery.
Poly Water Trucks
Poly tank models provide another water truck option across three capacities from 8,000L to 19,000L.
8,000L Poly Water Truck
4×2 Cab Chassis
An 8,000L poly tank configuration for operations requiring a smaller 4×2 water truck.
15,000L Poly Water Truck
6×4 Cab Chassis
A higher capacity poly tank model built on a 6×4 chassis.
19,000L Poly Water Truck
8×4 Cab Chassis
The largest poly water truck in the STG range, combining a 19,000L tank with an 8×4 chassis configuration.
Compare STG Water Trucks
The table below provides a quick comparison of STG's six water truck configurations.
| Water Truck | Tank Construction | Cab Chassis | Model Details |
|---|---|---|---|
| 8,000L Water Truck | Galvanised steel | 4×2 | 8,000L water truck |
| 13,000L Water Truck | Galvanised steel | 6×4 | 13,000L water truck |
| 18,000L Water Truck | Galvanised steel | 8×4 | 18,000L water truck |
| 8,000L Poly Water Truck | Poly | 4×2 | 8,000L poly water truck |
| 15,000L Poly Water Truck | Poly | 6×4 | 15,000L poly water truck |
| 19,000L Poly Water Truck | Poly | 8×4 | 19,000L poly water truck |
Tank capacity is only one part of the decision. Site access, refill frequency, chassis requirements and how water needs to be distributed should also be considered when selecting a water truck or water cart.
More detailed specifications for each model are available throughout the STG water truck range .
Water Trucks for Queensland Civil and Construction Projects
Water trucks are used across civil and construction projects for dust suppression, water cartage and site water distribution.
Smaller 8,000L models may suit sites where access and manoeuvrability are important, while larger 6×4 and 8×4 configurations provide additional capacity for operations with higher water demand.
The distance between refill points should also be considered. A larger tank may reduce refill frequency, but the truck still needs to suit the access, road conditions and working environment of the project.
Where a fleet requires other specialised vehicles, STG also manufactures trucks for construction operations .
Water Trucks for Queensland Mining Operations
Mining operations may require water trucks for haul road dust suppression, water distribution and other site applications across larger operating areas.
STG's higher capacity options include the 18,000L galvanised model and 19,000L poly model, both available on 8×4 chassis configurations.
Water trucks can also form part of a broader specialised fleet. STG's mining trucks for Queensland and the Northern Territory include water trucks alongside vacuum trucks, service trucks and other vehicles for mining operations.
Site requirements should be considered early so tank capacity, chassis configuration and equipment can be reviewed together.
Choosing the Right Water Truck Configuration
The largest tank is not automatically the right truck for every operation.
The best configuration depends on where the vehicle will operate, how often it needs to refill, the access conditions and how water needs to be applied on site.
Galvanised Steel or Poly Tank
STG offers both galvanised steel and poly water tanks.
The galvanised range includes 8,000L, 13,000L and 18,000L capacities, while the poly range includes 8,000L, 15,000L and 19,000L options.
Tank construction should be considered alongside the complete vehicle specification rather than as an isolated decision.
Chassis Configuration
STG's water truck range spans 4×2, 6×4 and 8×4 chassis configurations.
The 8,000L models use a 4×2 chassis, mid capacity models are available on 6×4 configurations, and the largest 18,000L and 19,000L models use 8×4 chassis configurations.
Spray Equipment and Controls
Water distribution requirements can vary significantly between sites.
For example, the 8,000L galvanised water truck includes pneumatic in cab spray controls and a hydraulically driven water pump. Optional equipment listed for the model includes a water cannon and rear pressurised dribble bar.
Available equipment differs between models, so specifications should be confirmed for the truck being considered.
Water Truck Manufacturing and Support in Ormeau
STG Global's Queensland facility is located in Ormeau and provides manufacturing, service and support for Queensland customers.
This gives local fleet operators direct access to STG for new water truck enquiries as well as ongoing support once the vehicle enters service.
For Queensland water truck enquiries, speak with the STG team or submit the quote form below.
Water Truck Service Across Queensland
Ongoing servicing should be considered when adding a specialised vehicle to your fleet.
STG provides service support through its Ormeau facility and maintains an authorised service and parts network for customers operating across Australia.
For trucks operating outside South East Queensland, provide the vehicle location when arranging support so STG can confirm the most appropriate service option.
Current servicing information is available through the STG service and support network .
Water Truck Delivery Across Queensland
STG supplies specialised trucks to customers across Queensland, including operators outside South East Queensland.
When requesting a quote, include the location where the truck will operate, the capacity you are considering and its intended application.
Providing those details early helps STG review the truck configuration alongside delivery and ongoing support requirements.
Our Water Truck Modules Fit These Major Manufacturers
Water Truck Videos
Visit our channel on YouTube
Testimonials
WATER TRUCKS CATALOGUE
Queensland Water Truck Questions
STG Global's Queensland manufacturing, service and support facility is located at 49 Motorway Circuit, Ormeau QLD 4208.
Contact STG on 1300 998 784 to discuss your requirements before visiting.
STG offers water trucks ranging from 8,000L to 19,000L across 4×2, 6×4 and 8×4 chassis configurations.
The appropriate capacity depends on factors including water demand, refill distance, site access and how the truck will be used during the working day.
Water truck and water cart are commonly used terms for vehicles designed to transport and distribute water across civil, construction and mining sites.
When comparing vehicles, focus on the actual specification including tank capacity, chassis, spray equipment and intended operating conditions.
Yes. STG supplies specialised trucks to customers across Australia.
Include your Queensland project location when enquiring so delivery and ongoing support requirements can be considered alongside the truck specification.
Optional equipment is available across the STG water truck range, with available options varying between models.
Provide the equipment requirements for your site when requesting a quote so the complete configuration can be reviewed.
Water truck availability varies depending on the model and configuration. You can browse our current truck inventory .
Availability changes regularly, so confirm whether a suitable water truck is currently available and where the vehicle is located.
Request a Queensland Water Truck Quote
Need a water truck for a civil, construction or mining operation in Queensland?
Provide your site location, preferred capacity and intended application. STG can help you compare the available models, equipment options and current availability.
Prefer to speak with the team?
Call 1300 998 784Tell Us What You Need
Complete the form and the STG team will get back to you.